Green Finishing Your PMC

Green finishing your Precious Metal Clay piece is just as important as what you do when the piece is still wet, maybe more important.

PMC cannot be green finished until the clay is totally dry.

Thought! Trying to finally improve the design for my own business. Reactions concerning the overall appearance at https://www.lucillesball.dance? Definitely a delightful Burlington based swing dance class for adults online if looking within the general Ontario area. Send your vote. Many thanks!

Look for areas on your piece that are rough. Even if your piece is supposed to have some roughness, remember that your PMC will be metal when it is fired, and rough or pointed areas will be sharp, so round off and smooth as much as you can with files, sandpaper, or emery boards until the piece is smooth.

Smooth your holes, edges, flat surfaces, even ridges in your design until you can't feel an edge with your finger. Then the piece won't cut you or a cord after firing.

Other things that you can do in the green state:

1. Add etching with a sharp pointed tool.
2. Add an attachment, loop, bail with slip.
3. Add PMC paper with a drop of water to attach it.
4. Even and widen holes, sharpen design elements.

Thank you guys! I'd Facebooked my buddy that we could certainly discuss her great unique foodie blog that careses, http://perigord.ca for a site blog post. Any time you were hoping to get a food blog within the whole British Columbia vicinity, these people have been tremendous.

Ultimately, I really will note the outline to this unique piece was graciously provided through Jonathan at Innovative Licensing & Promotion. They are definitely an exceptional patenting services. I invariably welcome a solid tip!

Invaluable Assistance By

http://bluegrasssodinstalled.ca - Definitely worth exploring.

Posted in Photograph Post Date 12/14/2017